Skip to main content
  • Technologies that open up new roads
  • Combo model sample is ready
  • Open Web API is finished
  • Apps and extension are created

R.A.M.F.

We present a universal device that combines a receiver, a spectrum analyzer, a measuring instrument and a sat finder. We called this device R.A.M.F. This device provides many benefits to operators, wholesalers and consumers.

Unique Features of Our Equipment

 

Highly accurate system diagnostics, with status reports provided to both the customer and the provider.

When technical parameters of the signal are measured at the receiver and compared with baseline parameters at the LNB, the following analysis takes place: the quality of the cable wiring, checks for possible cable damage, the need for antenna adjustment, LNB condition and signal disturbances (caused by high winds, for example). With a design enhancement of the receiver, we are also able to analyze receiver power on the output and parameters of R.A.M.F power supply.
 

Signal quality report generation.

If requested, the card ID can be included in status reports. That will allow for comparison with the current database of clients.

If there is a need for an iOS app or Android app, we can develop one as well. The app can be used, for example, to connect to the receiver remotely. The app can provide such features as showing the equipment location, and maintaining the database of all installed equipment. It might also allow to send special offers to individual customers, to keep a log history for each customer communication, etc. We can also customize the app with features specific to your business and needs.

Initially, we had plans for such an application, but our engagements with several operators showed that providers would like to take the ownership of that. In general, the application functions will include diagnostics and configuration.

R.A.M.F. Can Measure

 

Spectrum

 

RSSI

 

SNR

 

MER

 

BER

 

PER

 

LM

 

Output voltage

 

Signal interference

 

Antenna vibrations

 

Voltage in the cable

 

22kHz control signal attenuation

Usage Options

The easiest way to use the device is to communicate via a web browser to an IP address of R.A.M.F. with any device or by using an Android app or iOS app. In the instance where R.A.M.F. has a constant connection to the Internet, the provider can simultaneously monitor and control the state of the satellite system.

Initial installation requires nominally measuring parameters at the LNB. Our device allows customer to find the satellite, and the data obtained during installation of the antenna will be the baseline. If customer has pre-installed antenna, he can connect R.A.M.F. once near antenna to receive technical parameters.

To prevent complex issues with power at the antenna such as receiving power, we can produce receivers with a dedicated power supply of 12V and use an RG-6 cable with 2 adapters.

R.A.M.F. Features for Antenna Setup

The easiest way to use the device is to communicate via a web browser to an IP address of R.A.M.F. with any device or by using an Android app or iOS app. In the instance where R.A.M.F. has a constant connection to the Internet, the provider can simultaneously monitor and control the state of the satellite system.

Initial installation requires nominally measuring parameters at the LNB. Our device allows customer to find the satellite, and the data obtained during installation of the antenna will be the baseline. If customer has pre-installed antenna, he can connect R.A.M.F. once near antenna to receive technical parameters.

To prevent complex issues with power at the antenna such as receiving power, we can produce receivers with a dedicated power supply of 12V and use an RG-6 cable with 2 adapters.